Tuesday, August 18, 2026

More About Energy Drinks

I have previously posted about Bing energy drink, a made-in-Colorado product made from real fruit juices and real sugar. It's still my favorite energy drink, for all the reasons I gave back then.

Now there's an alternative to Bing -- not a competitor, just an alternative. It's called Huxley. It's relatively new, having started in Minnesota in 2023 and just now reaching Colorado. It's a regional energy drink, like Bing in Colorado and Guru in Canada.

Like Bing, Huxley is made with real fruit juice, 11 percent versus Bing's 5 percent. Like Bing, Huxley is sweetened with only 5 grams of cane sugar and has only 40 calories. Like Bing, Huxley has a modest amount of caffeine, 90 mg versus Bing's 120 mg. (Remember, an 8-ounce cup of coffee has 96-195 mg).

Huxley has a few other selling points: its caffeine is derived from the cascara coffee bean, making it supposedly better than regular caffeine. Eh. I'm a chemical engineer; to me, caffeine is caffeine. It also contains l-theanine, which is supposed to moderate the buzz from that initial caffeine hit, and electrolytes to counteract the dehydrating effect of caffeine. I'm skeptical about those last two claims, but we'll see.

Bing also contains electrolytes, plus a full suite of B vitamins. As I've said before, we buy energy drinks for the caffeine and the sugar.

As far as price is concerned, the regular prices of Huxley and Bing are more or less equal.

Variety pack shown, does not include Peach


Huxley's primary claim is that it tastes good. As I wrote previously, one of the things I like best about Bing is the way it tastes. Like Bing, Huxley has a small product line, featuring only four flavors (so far): Peach, Mango, Strawberry, and Tangerine.

I decided to put Huxley to the test. I evaluated Huxley against the following criteria:
  • Does it taste right? That is, does the peach taste like peaches, and so on?
  • Does it taste good?
  • Does it  not taste like a chemical formula?
  • How's the energy boost?
Here are my first impressions. listed in the order in which I tested them. At the end of the article, I've listed them in order of taste preference.

Peach: It tastes like fresh peaches. It even has the faintly bitter edge that fresh peaches have. It's an enjoyable flavor; I could drink it all day. It doesn't taste like a chemical formula. And it has an energy boost similar to Bing.

Tangerine: This one's a solid winner.

Huxley Tangerine is a delicious and refreshing blend of tangerine and orange. It perfectly captures the tang of fresh citrus. It tastes nothing like orange Fanta, and more like carbonated orange juice. It's reminiscent of the equally refreshing Bing Citrus, but with notes of orange instead of lime or grapefruit.

I would enjoy drinking one of these after a hot day in the workshop or the garden. In fact, I went back to the store to buy more, and it's all sold out. So I waited two days, then went back and bought all of the Tangerine they had in stock -- so they're sold out again.

You know, Italy has a delicious orange soda called aranciata. By law, it must contain at least 12% orange juice, or it cannot be sold as aranciata. (UPDATE: In 2018, Italian law bumped that up to 20%, according to the article in Italian Wikipedia.) Huxley chose to include only 11% juice, one percentage point off the Italian standard, but Huxley Tangerine can hold its own against most brands of aranciata, 

Oh, and this one rings all the other bells, too.

This is my favorite flavor of Huxley, and a worthwhile addition to the energy-drink shelf in my refrigerator.

Strawberry: Long ago, the Pop Shoppe had a strawberry soda. More recently, Canada Dry has released a Strawberry Fruit Splash ginger ale. Those are the only carbonated strawberry drinks I can use as reference points. Other references are strawberry Starburst fruit chews, my wife's strawberry freezer jam, and fresh strawberry pie.

I'm only kidding about the Starbursts. They are delicious, it's true, but they're candy. I don't expect a strawberry drink to taste like candy. (Unless it's Alani Nu.)

Against that background, however, the Huxley Strawberry drink is rather disappointing. It's not the same strawberry flavor as that of fresh strawberry pie, for example. It doesn't make my mouth say, "Mmmm! Strawberry!"

Please note that this is a purely subjective evaluation. You may absolutely love the Strawberry. At least try it once.

Mango: I think that mangoes taste like tropical peaches, if that makes any sense. Huxley Mango tastes like dried mango -- like the best dried mango I've ever eaten. It's more intense than a fresh mango. I enjoyed sipping it for an hour, and when the can was empty, I was sad.

 I like it better than the Peach flavor. The energy boost was similar to a Bing, of course. And there was no chemical-formula undertone.

Bottom line: Huxley is good stuff, and a nice complement to Bing. I wish the company success. Here are my rankings, in order of taste preference.
  1. Tangerine
  2. Mango
  3. Peach
  4. Strawberry

Sunday, August 2, 2026

Today's Useless Science: The Can-Balancing Trick

Have you ever noticed that a half-full can of soda is less prone to tipping over and spilling than a full one?

Have you ever noticed that a nearly-empty can of soda is MORE prone to tipping than a half-full one? 

Have you ever taught your grandchildren that trick of balancing a can of soda at a 45 degree angle, on the grooves on the bottom of the can?

Try balancing it like this.

 Here's the science behind it.


The good folks at the Department of Useless Science have taken the specs on the aluminum used in a can of soda, and the density of a typical carbonated drink, and calculated the center of gravity for that can of soda - from the moment before it is opened, to the moment the last drop is drained. Here's what they found.


The center of gravity is lowest when the can is a bit less than one quarter full. Knowing that, you can do that cool balancing trick to impress your grandkids.

You can also predict the most likely moment that the youngest grandchild will knock over any random open can of soda.


Sunday, June 14, 2026

MAGA Christians vs. Matthew 25 Christians

 A new trend popped up in the media this week. Someone coined the term "Matthew 25 Christians," and it gained immediate traction.

Background: MAGA Christians

The term "Matthew 25 Christians" was created by someone trying to differentiate between MAGA Christians and true Christians. A MAGA Christian believes in a Christianity that promotes equality, peace, love, charity, and religious freedom -- but only if you're a white, Protestant American, born and living in the USA, and of western European ancestry. Even Jesus Christ himself wouldn't qualify to be a Christian under this definition.

Closely related to MAGA Christianity is Christian Nationalism, which title claims two pieces of virtue that it does not deserve. Christian Nationalism is the belief that the USA was founded on Christian principles, as a Christian nation, and that that makes it a special nation among all the nations of the world. (Parenthetical comment: other ideologies also have this belief. But they don't turn it into a blunt weapon like Christian Nationalism does.) Christian Nationalists wish to force their beliefs onto everyone in the USA, through laws, regulations, and physical enforcement. 

If the two overlapping groups, MAGA Christians and Christian Nationalists, have their way, then the country will be run by an American Taliban, indistinguishable from the despots currently oppressing Afghanistan, Iran, and other nations under the color of religion.

Much of this is being driven by evangelical Christians, whose professed beliefs are often so far removed from true Christianity as to be unrecognizable. And the evangelicals are the best at setting themselves up to judge who is and isn't Christian.

(To be fair: It's not just the evangelicals. Every single slice of Christianity is expert at judging and condemning their fellow Christians, putting themselves with the sheep and everyone else with the goats, arrogating the authority of Him Whose Right It Is To Judge. But if my own children's high school experience is any indicator, the evangelicals are the worst offenders. If you are an evangelical Christian, and you object to this characterization, then show it to me by the way you live. See By Their Fruits, below.)

The Quiet Rise of the Matthew 25 Christians

The people who coined the term "Matthew 25 Christians" were pointing out the wide divide between true Christianity and MAGA Christianity.

In the Gospel of Matthew, chapter 25, Jesus gives the great parable about separating the sheep (his followers) from the goats (everybody else) at his Second Coming. The whole parable is summarized in verse 40: "And the King shall answer and say unto them, Inasmuch as ye have done it unto the least of these my brethren, ye have done it unto me."

MAGA Christianity denies aid to the poor, sanctuary to the immigrant, health care to the sick, and kindness to the prisoner, actions that Jesus specifically calls out in this parable. He condemns those who practice MAGA Christianity with this counterpoint in verse 45: "Then shall he answer them, saying, Verily I say unto you, Inasmuch as ye did it not unto one of the least of these, ye did it not unto me."

More and more Christians are standing up and denouncing MAGA Christianity. They are finally saying, "That's not who I am. That's not what I believe."


"But, but --" the MAGAs Protest

During the 2012 elections, evangelical Christians mobilized and became a potent political power. Their leaders became kingmakers. One evangelical leader was interviewed on the radio, and he was condemning certain political candidates for not being Christian, and therefore, of course, unworthy to hold public office.

The interviewer asked him what constitutes a Christian.

"One who believes in the Bible."

The interviewer pointed out that nearly everyone calling themselves a Christian believes in the Bible.

"Well then, one who believes in my Bible."

Not a word about believing in the person, Jesus Christ. Not a word about believing that He was the Son of God. Not a word about believing in His divine mission. Not a word about knowing what is written in the Bible and putting it into practice in their daily lives.

This has been carried to extremes in the last three years. To a MAGA Christian, you are only a Christian if you hold the same political views that they hold, if you agree with their "othering" of the American population, and if you agree with the supremacy of white, Protestant, natural-born American citizens over everyone else.

Nothing in there about their namesake, Jesus Christ.


How to Tell the Difference

The easiest way to tell the difference between the MAGA Christians and the Matthew 25 Christians is to use Jesus' own Sermon on the Mount as a yardstick. This sermon, the greatest guide on true Christian living, is found in chapters 5 through 7 of the Gospel of Matthew.


"Lord, Lord"

In chapter 7, Jesus himself warned: "Not everyone that says to me, 'Lord, Lord' will get into the kingdom of heaven." He told of those who would plead with, "Lord, Lord, have we not prophesied in your name? And in our name cast out devils? And in your name done might works?" 

He told them that he would say, "I never knew you; get away from me, you who work iniquity."


About Public Displays of Christianity

One of the most insidious things in today's world is the rise of performative Christianity. Once confined to gatherings like church camps, rallies, and jamborees, now Christian "influencers" have a louder and louder voice, through TikTok, Instagram, podcasts, and other social media. All of this "influence" draws people away from true Christianity and closer to the extreme, damaging positions espoused by MAGA and Christian Nationalists.

Jesus warned about these types in chapter 6, when he said: "Moreover, when you do your alms, don't sound a trumpet before you, as the hypocrites do in the churches and in the streets, so that they can receive the glory of men. Verily I say unto you, they have their reward."

They do good because they want the public praise and adulation -- and, in 2026, Likes and followers. That is their reward. As far as Jesus is concerned, that's all they get.

"But," He continued, "when YOU do alms, let not your right hand know what your left hand is doing: that your alms may be seen in secret, and your Father who sees in secret shall reward you openly."


By Their Fruits

Again in chapter 7 of Matthew, Jesus himself tells how you can tell the difference between a MAGA Christian and a Matthew 25 Christian: "You shall know them by their fruits."

Whose words and deeds correspond more closely to the deeds and the teachings of the Master?

Whose life more closely follows the admonition, "Follow me, and do the things that you have seen me do"?

Who spreads out their hands and echoes the Master's invitation, "Come unto me, all ye that labour and are heavy laden, and I will give you rest?" 

Who is brave enough to tell someone who lives a lifestyle different from theirs, "Neither do I condemn thee"?

Who emulates the Master by simply "[going] about doing good?"

No, way too many of us are on the wrong side of Jesus's warning from Matthew chapter 6: "Judge not, that you be not judged." And especially the MAGA Christians. They have everyone judged, condemned, marginalized, disenfranchised, and in many cases deported. That's so much easier to do.


Pure Religion and Undefiled

Jesus' apostle James wrote this in his tiny part of the Bible: "Pure religion and undefiled before God and the Father is this, To visit the fatherless and the widows in their affliction, and to keep himself unspotted from the world." I submit that this is only a tiny slice of true Christianity, but MAGA Christians can't even do this part.


"You must choose. But choose wisely."

The old knight in Indiana Jones and the Last Crusade said these words: "You must choose. But choose wisely."

So, which one are you going to be? A goat, or a sheep? A MAGA Christian? A Christian Nationalist? Or a Matthew 25 Christian? You must choose. Choose wisely.

Choose wisely.




Monday, December 22, 2025

Tracing the Depew lineage: how far back can we go?

For years, my Depew ancestry was stuck at 1850, with Joseph Depew in Montrose, Iowa. Joseph and his wife, Wealthy Elmer, had migrated with the Mormons to Nauvoo, Illinois, and had settled in Montrose, just across the Mississippi River from Nauvoo. Family legend was that, when the family was packing up to leave Montrose and head west with the Saints, Joseph was nowhere to be found. Wealthy and her sons were in her parents’ wagon, ready to move out, when Joseph showed up drunk. He yelled that no wife of his was going west with the Mormons, and pulled her off the wagon. Her father got the horses moving, the wagon started rolling, and Joseph couldn’t stop it. So Joseph and Wealthy stayed behind while their boys went to Payson, where they were raised by their grandparents.

The oldest record of Joseph Depew was an 1850 census record, saying that he was born “about 1800” in “Pennsylvania.”

My brother, Craig Depew, has done a lot of digging over the years, and we think that Joseph’s reputation has been rehabilitated. He may or may not have been the town drunk, but he did move west with his family. He never made it to Utah. Both Joseph and Wealthy died of illness in Winter Quarters, Nebraska. Their sons did go to Payson, where they were raised by their grandparents.

Uncle Craig also found that Joseph was descended from Nicolas DuPuy, a Dutch immigrant who arrived in New Amsterdam (now New York) in the 1663. Nicolas was born in Holland in 1627.

Further digging gets us tangled up with questionable sources, including a French historian named Louis Moréri, who never let the facts get in the way of a good story.

If Moréri is to be believed, Nicolas’ lineage can be traced from Holland to France, where the DuPuy family were knights and noblemen, originally from the Dauphiné region of southeastern France. They converted to the Huguenot religion, which put them at odds with the Catholic church and the French king, and eventually made them outcasts. That’s why they fled to Holland, and from there to the New World.

In the Dauphiné, Hugues DuPuy was born in 1055, in Peyrins, France. He and his three sons went to the Holy Land with the First Crusade, and acquitted themselves well. One of his three sons, Raymond DuPuy, was the “second Grand Master of the Knights Hospitaller, of the Order of St. John of Jerusalem.” He was a Big Cheese. No, I’m not named after him. And no, I’m not descended from him.

If you go back further, and if Moréri can be believed, Hugues was the son of Raphael de Podio, who was born in 1011 in Lucca, Tuscany, Italy. (Italy!) He was a military commander and the Grand Chamberlain of Conrad II, the Holy Roman Emperor. Conrad gave Raphael a governorship in the Dauphiné, so he moved to Peyrins and Frenchified his last name to DuPuy.

Both “DuPuy” and “de Podio” translate literally to “of (or from) the podium,” but can also be translated to “of (or from) the heights.” Many French geographical names include “Puy” in reference to a hill, a ridge, or another high place.

Raphael himself was a descendant of Norman Anglie de Podio, born in A.D. 905. Norm was the first to bear the “de Podio” surname, his father being named Adminius Amélius Simplicius. It would be really great if we could say that the Depew family line goes all the way back to Norm, in A.D. 905.

Norman’s name is dangerously anachronistic, and I have a couple of problems with it.

First, the term “Norman” meant “Northman” or “Norseman.” Originally, it referred to the Vikings, the Scandinavian raiders that terrorized Europe and Britain for a century or more. The term wasn’t generally used until after Norm was born. The earliest it could have been used is A.D. 911. That’s when king Charles III of France and the Viking leader Rollo signed a treaty, giving Rollo and his people the land that is now called Normandy, in exchange for no longer raiding the rest of France. Over time, Rollo’s people became known as “Normans.” But that began in 911, and our man Norm was born in 905.

Second, the middle name “Anglie,” or “Anglo saxony” as one source renders it, refers to two Germanic tribes, the Angles and the Saxons, who invaded the island of Britain in the 5th Century, and by A.D. 899 were united in one kingdom under Alfred the Great. The year 899 is when Alfred the great died.

Our man Norm was born in 905. The term “Norman” didn’t exist until after 911. And the term “Anglo Saxon” referred to a people on an island all the way on the other side of the continent, a people that didn’t exist as a unified people until 899. I will state plainly that I think someone in a later century made up the name “Norman Anglie”, and they may have even made up the person.

To complicate things even further, it looks like the Amelii line is from southwestern France, near the Pyrenees and Spain. While Moréri has been quick to connect the Ameliis in the southwest with the de Podios in the southeast (and in Italy!), other reputable historians have not been able to confirm that connection, and there is considerable arguing between the two factions.

So, depending on how much you believe, we can trace our Depew lineage back to Joseph in 1850, Nicholas in 1627, Hugues in 1055, or Norman in 905. 

Monday, October 13, 2025

"Other" and "Othering"

"Other" is a powerful weapon. It's a cruel weapon.

"Other" allows us to divide the world into two groups: people who are like us, and people who aren't like us.

We can then marginalize the "other" group. We can ignore them. We can resent them. We can fear them, and hate them, whoever they are. When you "other" someone, you can feel justified in mistreating them, excluding them, denying them respect, denying them basic humanity. You can feel justified in bullying them, hurting them or casting them out.

"Othering" someone lets you assign a label to them, to make them easier to identify because of their "otherness." Often, the label acquires a pejorative connotation, if it didn't have one to start with. "Others" become "extremists," "terrorists," "criminals," "undesirables."

It's easy to generalize about an entire population of "others" based on the public actions of one or more bad actors. But it's just as easy to justify or rationalize the bad actors in our own group, the population of people like us, and to say "the rest of us aren't like that." That's called the Fundamental Attribution Error. More about that in another post.

If we succeed in getting rid of all the "others," if we end up with a population that is just like us, then we end up in a bland, boring world. We end up with a plate of plain, white rice. Every day. For every meal. BORING.

I used to attend a regular weekly meeting (high priests group; if you know you know) where everyone thought the same thoughts and said the same things, all the time, week after week. Saying something different was, um, not well received. I finally started finding excuses to skip the meetings. I would rather pull the veins out of my forearm with a fork than sit through that again.

The fact that we are not all the same should make us stronger and more united, not weaker and less united. Granite is made of four different minerals, none of them as strong in their pure form as when they are combined in granite.

Our differences are what make life interesting. A smarter man than me once sang:

    Rejoicing in the differences, there's no one just like me
    Yet as different as we are, we're still the same.

We need to recognize that we are all children of the same God. He loves us equally, and therefore we should love each other equally. When we truly understand this, the "other" designations melt away. Rather than building walls, or fences, or detention/isolation centers, we should be building bridges. Remember, we are stronger together. 

Friday, July 25, 2025

Oh Please, Not an AI Music Composer

A Hamilton player piano:
 an old-fashioned music machine.


Facebook just fed me an advertisement for an AI music composer -- an AI engine that will write music for you. Does nobody remember George Orwell's 1984? In that dystopian novel, all of the pop music was written by computers. It was glurge that appealed to the masses, and pacified them, but it was emphatically not high art.

So far, I'm not all that impressed with AI. I know it's "the future," and I know "the future is now," but frankly, the way most humans wield AI is clumsy and talentless. We are excited about the sloppy software, and B-grade graphics that people have generated using AI. And we've read story after story about people using AI to make resumes, term papers, book reports, newspaper articles, speeches, and even legal briefs -- all of them marred by sloppy logic, inaccurate "facts" and analyses, made-up references, and so on.

If AI music promises to be of the same quality as the rest of this garbage, then I will only listen to musc created before 2025, thankyouverymuch.

To be clear, ultimately it's not the AI engine or Large Language Model (LLM) that's the problem. The AI is just a tool. The problem lies with the human using the tool.

Most of you are too young to remember the original Apple Macintosh computer. It was released in 1984 -- gasp okay, that's ironic. Anyway, the Mac came with a suite of software including a desktop publishing program called Aldus PageMaker. This was really putting power in the hands of the people. Suddenly, any idiot could be a desktop publisher.

And do you know what? Every idiot became a desktop publisher. The world was papered with ugly, lousy, amateur posters and newsletters and banners. You could spot a PageMaker document a mile away, not because of any defects in the software, but because of the human who had used PageMaker with all the skill of a lefthanded troll to create such an ugly document.

Now we're seeing the same misuse of AI. We're already seeing the PageMaker-quality output in words, in images, and in video. Are you ready to hear it in music? With AI, any idiot can become a composer.

I read today that composer John Williams has just finished writing a piano concerto. The man is 93 years old. He has a lifetime of talent and experience behind him. AI music may be able to imitate his compositions, but it will never match his genius or the quality of his work. There is no shortcut to that kind of quality.

Friday, July 11, 2025

Wednesday, April 23, 2025

Potholes! A new video game idea.

We're visiting our daughter and her family in Kansas City this week. We have been visiting, on and off, since last August. While we've been driving around this week, it has been obvious that the roads around here had a hard winter: potholes, potholes everywhere.

Potholes, potholes, everywhere!

Map of potholes in Kansas city



While attempting to dodge the potholes, I got an idea for a great new video game. I'm going to call it "Potholes!". With the exclamation point.

Here's the basic idea

The premise is simple. It's a first-person point-of-view driving game. You are in the driver's seat, looking through the windshield as the road scrolls towards you. This should be easy to do in a 2D game engine, like Defold or Godot.

As you drive along, potholes appear in the road. Each time you hit a pothole, you register some degree of damage. The larger the pothole, the greater the damage. When your damage reaches a critical point, your car falls apart, right there in the middle of the road. (Use a cut scene for this.)

Scoring

Your car has an odometer. Your score is how far you can get before your car falls apart.

Details of operation

The point is to dodge the potholes. You can drive around them, or you can straddle them. Damage occurs when your tires hit the potholes.

You get an animated "bump-bump" when you hit a pothole. The larger the pothole, the larger the bump.

You can dodge into the oncoming lane, but if you collide with oncoming traffic, you crash, obviously. (Use a different cut scene for this.)

There is a rare, giant, car-eating pothole. When you drive into it, your car disappears, as you can imagine. This one gets a Warner Brothers Cartoons style cut scene, where you see the car drive out into thin air and then drop straight down, leaving a puff of dust at ground level.

Enhancements

Day and night. At night, you have wimpy headlights that may or may not catch all the potholes. 

The headlights occasionally flicker, often at just the wrong time. If this is too annoying and spoils the game, I will drop it.

Fog! Potholes are invisible, until you're almost on top of them. Maybe I should add heavy fog, where the potholes are completely invisible.

Degrees of difficulty

  • Easy: slow speed, few potholes (This will be the original game)
  • Medium: higher speed, more potholes
  • Hard: highest speed, lots of potholes, but density will vary at random

Steal this idea! It is NOT copyrighted.

Feel free to steal my idea and make it your own. Feel free to sell your game and get rich from it! Maybe just acknowledge me in the credits.


Wednesday, April 2, 2025

Cory Booker shines again

Cory Booker just finished giving a 25 hour, 5 minute, speech on the floor of the U. S. Senate, speaking in opposition to Donald Trump's policies and executive actions. The black man broke the previous record of 24 hours, 18 minutes, set by white segregationist Strom Thurmond in 1957, speaking in opposition to the Civil Rights Act.

 In 2019, Senator Cory Booker (D-NJ) threw his hat into the 2020 presidential ring. He was impressive at the time, although he didn't get very far in the competition. He sat out the 2024 election, in deference to Joe Biden and then to Kamala Harris when Biden dropped out of the race.

It's a much different world today. Biden won in 2020, Harris lost in 2024, and we're all watching as Trump and his minions run roughshod over American institutions, in a clumsy yet brutal attempt to remake the USA into the Germany of the late 1930s.

The Democrats were so thoroughly defeated in 2024 that they still haven't recovered. They do not have a champion, a leader, someone with the charisma of Bill Clinton or Barack Obama to show them the way out of their wilderness. The Republicans in Congress, in the courts, and in most of the states, will not oppose Trump, and the Democrats are in every way too weak to oppose them.

I was mildly optimistic about Booker in 2019. He was certainly a better alternative than Hillary Clinton. But maybe now is his time to stand up, take on the mantle of leadership, unite the Democrats, and do something effective to oppose Trump. It's been five months since the election, three and a half months since the inauguration, and we have around three years to go until the next presidential election -- that is, if we get to have one.

Democrats need to unite behind somebody. Booker just showed that he may be the man for the job this time.

Tuesday, March 4, 2025

The Tariff Wars: Canada Strikes Back

 I know that, to many Americans, there is no weather north of the US-Canada border. USAnian weather maps often show clouds, storms, winds, and temperature readings right up to the border -- and no further.

Likewise, to many Americans, there is no civilization and nothing newsworthy north of the US-Canada border. All the news happens in the USA, and the only civilization that matters is in the USA.

Well, if Americans aren't watching Canada today, then they are missing something important.

Canada has long been the USA's closest and most faithful ally. You may not know it, but when the Japanese attacked Pearl Harbor on December 7, 1941, Canada was the FIRST Western country to declare war on Japan. Canada declared war on the evening of December 7, the same day as the attack. The USA declared war on Japan the next day, on December 8.

Since 9-11, Canadian troops have fought alongside American troops in every theatre of the Global War on Terror. They never came late to the fight, and they never came afraid or unarmed.

All of this is to say:

If you weren't watching the news carefully today, you missed something important. In the dark predawn hours of Tuesday morning, Donald Trump slapped his 25% tariffs on Canada and Mexico. After the sun came up, Canada slapped back. Hard.

If you want to see what was said, and what is being done, head over to CBC.ca, the Canadian Broadcasting Corporation website, and have a look. (That link will go stale in a few days. The world keeps turning, you know.)

In a nutshell, Canada's Prime Minister said that a trade war now exists between the US and Canada. He slapped a 25% retaliatory tariff on $155 billion of American goods. He removed American goods from store shelves. And he warned that the provincial premiers (like state governors) were going to take additional action themselves.

PM Justin Trudeau pointed out that Canada's quarrel wasn't with the American people, and in true Canadian fashion, he apologized for the pain it was going to cause them. He made it clear that Canada's beef was with "you, Donald."

The premier of Ontario, Doug Ford, announced that American wines, beers, etc. had been removed from the provincial liquor stores, representing a gigantic loss of revenue for American producers. He announced that governments in the province would no longer be doing business with American contractors or commercial entities. He announced that the province had torn up its contract with Starlink. He warned that Ontario would be switching off the flow of electricity from the province to Minnesota, Michigan, and New York state if Trump didn't cancel the tariffs.

The premier of Alberta, Danielle Smith, announced that the province was ready to close the taps on oil and gas flowing south. The premier said, in effect, "This doesn't worry us too much. We can always find someone else to buy it from us."

That's just the start of it. Canada has taken the gloves off. They basically said, "You want a fight, you got it. Both sides are gonna get bloody, but we're not gonna lose."

#TrueNorth


Thursday, December 12, 2024

"Vote Now, Think Later"

 It's December 12. It's been about five weeks since Donald Trump won the presidential election, and it will be another six-ish weeks before he takes the oath of office.

In the past five weeks, we have found out that a lot of what he said on the campaign trail was a lie. He was saying whatever he had to say, to pull votes from the Harris campaign and to collect votes for his own campaign.

Some of his lies

Immigration

One of the things I'm most incredulous about is the fact that he courted and received so many votes from immigrants, and children of immigrants. (Disclosure: I'm an immigrant. Came across the border with my parents when I was 7 years old. Had a green card for 15 years, then became a U.S. citizen. You wanna make something of it?) They thought that somehow they would be protected from Stephen Miller's Nazi-like excesses. But after the election, Trump and his team started talking about all of the immigrants they would be rounding up and deporting -- which included a lot of those who voted for him.

It might not be fair to call this a "lie." In my mind, Trump has always made it clear where he stood on immigration and immigrants. He only likes to keep them around to take advantage of them. Other than that, he'd like to get rid of them. And by immigrant, I think he means anyone who isn't of pure 100% European descent.

Steel

On October 19, three local unions of steelworkers in Pennsylvania endorsed Trump's candidacy, because he had promised that he would save the American steel industry and protect steelworkers' jobs. Then, on December 2, he said that he would block the US Steel merger with Japan's Nippon Steel. If the merger is blocked, US Steel has said that it will have to shut down many facilities and lay off thousands of workers. The steelworkers are not happy with Mr. Trump, after they gave him their vote and he double-crossed them.

Minorities, Diversity, Civil Rights

Conservative Black community leaders across the country endorsed Trump and influenced their followers to vote for him. After the election, when Trump was nominating members of his cabinet, he completely sidelined all of them, even though many Black leaders were more qualified for the cabinet positions than a lot of the cronies and TV personalities who did get nominated.

Food prices (Groceries!)

Trump also promised that he would bring down grocery prices for the average American. In August, he said:

"From the day I take the oath of office, we'll rapidly drive prices down, and make America affordable again. Prices will come down. You just watch. They'll come down, and they'll come down fast."

 It's not really clear how he would do this, especially with all the threats of tariffs he has been throwing around. In fact, in a Meet the Press interview, conducted on November 25 and aired on December 8, he said, "I won on groceries." However, later in the same interview, when asked whether he would consider it a failure of his presidency if grocery prices didn't come down, he said: 

"I don’t think so. Look, they got them up. I’d like to bring them down. It’s hard to bring things down once they’re up. You know, it’s very hard. But I think that they will."

Mm-hmm.

More to come

We've only scratched the surface on the lies and deceptions that Trump used to get elected. We have another four years to see what else he's going to pull out of his bu-- I mean, hat.

"Vote Now, Think Later"

Social media, blogs, and news stories have been full of examples of voters saying things like "I voted for Trump, but I didn't know he was going to do this. If I had known, I wouldn't have voted for him."

Clearly, he managed to sway a tiny bit over half the country into voting for him. That's how elections work, duh. But what's interesting is that the other half of the country knew exactly what was going on. They weren't fooled. 

And those who are now saying, "I voted for him, but I didn't think ..." ? THAT'S EXACTLY RIGHT! YOU DIDN'T THINK!

For these people, the election slogan rattling around in their brains wasn't "Make America Great Again," it was "Vote Now, Think Later." 

What to do about it?

The majority of Americans who voted for Trump have given him carte blanche to make a wreck out of the country for the next four years. Unfortunately, thanks to you idiots, there's nothing we can do about it until 2028. Hopefully, by then you will have learned to THINK BEFORE YOU VOTE.

Another impeachment won't happen, and even if it did, it wouldn't see him removed from office. With this cabinet, an Amendment 25 removal is off the table. That leaves stroke, heart attack, or other similar scenarios. But We The People will not be part of any of these power moves. We simply have to wait it out.

Wednesday, December 11, 2024

Syria: That took way too long

 On March 17, 2012, I wrote an article predicting the rapid downfall of Bashar al-Assad, the tyrant king of Syria.

Boy, was I wrong.

With help from Russia and Iran, two other autocratic states and international troublemakers, Assad brutally suppressed that rebellion. Unfortunately, he didn't stamp it out completely. Rebel groups remained active in regions of Syria, and the country has had to endure 12 years of back-and-forth violence between the government forces, backed by direct Russian and Iranian involvement, and the rebel forces, backed by direct American, Turkish, and other involvement.

And, of course, Israel was always there to stir the pot whenever it felt that its national security was threatened.

In addition, the Syrian government and the Lebanon-based Hezbollah terrorist organization openly supported each other, with Hezbollah assisting the government forces at times.

ISIS also had a stake in the game, with a strong presence in Syria, but ISIS was playing for ISIS, not for Syria or for the rebels.

That all changed rapidly in the last week of November, this year.

On November 27th, rebel forces  led by the group Hayat Tahrir al-Sham (HTS), a former Al Qaeda affiliate, attacked the cities of Idlib and Aleppo in the north. After taking those two cities, they swept southward and took Homs, and finally Damascus on December 8th. (I think I got that day right.)

I MAY HAVE THE DETAILS OF THIS NEXT PARAGRAPH WRONG. I'LL HAVE TO CONFIRM THEM. THINGS HAVE BEEN HAPPENING FAST. Plus, I'm still grieving the loss of my son, and my mind is having trouble caring about what's happening in the rest of the world.

In the middle of the night, like at 2 a.m. on December 8th, just before the city fell, Assad loaded his family and much of his personal wealth (I'm talking about pallets loaded with cash and gold) onto a Russian transport plane and fled to Moscow.

The US assisted the rebels by suppressing an ISIS response. How did they do that? By bombing the crap out of ISIS camps, weapons caches, and other targets within Syria's borders. The US Air Force bombed literally thousands of ISIS sites in Syria.

Israel and Turkey took advantage of the Syrian government's helplessness to bolster their own national security. The Israeli navy destroyed the Syrian navy, tied up at docks in the port city of Latakia. The Israeli and Turkish air forces together destroyed 500 Syrian military targets over a two-day period, ensuring that Syria could no longer attack them or support attacks by other militant groups.

So here's the bottom line.

It didn't have to be this way. If Assad had responded differently to the May 2012 uprisings, he would still be in power, the country would be (relatively) at peace, and his people would enjoy the blessings of freedom, liberty, and prosperity.

But noooooooooo.

So he finally got what was coming to him. It's unfortunate that it took 12 years for it to happen.

Wednesday, December 4, 2024

Calling children by their full names

 We spent Thanksgiving this year with the family of one of our daughters. After dinner one night, one of her sons had a question for me.

He had noticed that all of the adults who know her address her by her first name, Kellie, except for me. I call her Kellie Jo, using both her first name and her middle name. He wanted to know why.

Hmm.

I think I gave him an adequate answer that night, but I have pondered on it ever since. I have often - not always, but often - called my children by their first and middle names. And I, myself, started to wonder why.

I got it figured out.

This week, my brother ran into a family friend from long ago - so long ago that they probably used to ride tricycles together. The boy's name was Greg. I have distinct memories of his mother yelling at him when he was in trouble, using his first and middle names: "Gregory Grant!" I heard it more than once. Sorry, Greg, I really didn't think you were that bad as a kid.

That reminded me of my own mother.  My mother was a great lady, but let's face it, she had anger-management issues. And when she yelled at us using our full names, we knew that she was really mad at us, or we were in deep trouble, or both. (And she didn't just use first and middle name, it was the whole enchilada.)

This next part of the story all happened in my subconscious. I admit that I have never given it any conscious thought. In fact, I didn't realize all of this until this week, when I put two and two (that is, "Kellie Jo" and "Gregory Grant!") together.

Subconsciously, I decided that I didn't want my own children to associate their names with an angry father, or with trouble. And besides, I was proud of the names we had given them.

So from the very start, I would address them using both their first and middle names. Not always, but often enough that it wasn't unusual.

Jason Daniel. Kellie Jo. Lori Dawn. Sandra Michelle. Christopher Michael (or "Chris Mike" for short).

 Whether it was a simple call to come to dinner, or a loving way to get their attention, or in the midst of playing a game or having fun, I would use both names. Over time (I hoped, subconsciously), they learned to associate their full names with love. And fun. And respect, and pride.

This many years later, when they hear their full name, I hope that it reminds them how much their father loves them.


Tuesday, November 26, 2024

Why are other drivers such awful drivers?

 Do you ever feel like you're the only good driver on the road? Do you ever wonder where everybody else developed such poor driving skills?

This is not another of Zyzmog's Laws of Motion, but rather an expansion on someone else's law.

Most drivers are not bad drivers. They just don't drive the way you do, or the way you expect them to.

To paraphrase the late comedian George Carlin:

There are two kinds of drivers on the road: morons and jerks. A moron is anybody who drives slower than you. A jerk is anybody who drives faster than you.

It's worth noting that all the morons think you're a jerk, and all the jerks think you're a moron.

Carlin's observation can be extended to cover any other aspect of driving.

The logical conclusion of all of this is that everybody thinks they're the only good driver on the road, when in reality we're all terrible drivers in someone's eyes.

In case you're interested in Zyzmog's Laws of Motion:

Sunday, November 10, 2024

Jason Daniel Depew: Gone way too soon



With his favorite plane, the Icon A5 seaplane


Possibly his first airplane.


This is a hard one to write. In fact, it's so hard to write that I'm going to copy and paste an excellent obituary written by someone else.

Our oldest son, Jason, was a pilot in the United States Air Force. When he quit the Air Force, he became a pilot for Delta Airlines. Jason always kept himself physically fit. The FAA requires all pilots to pass a cardiac health exam every six months. According to the doctors administering the exam, Jason's heart was in great shape.

Except for one day. On Thursday, October 31st, 2024, Jason and his wife, Jennifer, were out on a run. Jennifer turned one way to go home, and Jason turned the other way to go further. Some time later, a neighbor observed Jason running up the street, nearing his home, but "having trouble" as he ran. When Jason was in front of the next-door neighbor's house, he collapsed.

One neighbor called 911. Another neighbor checked his pulse and started CPR. Another neighbor ran to get Jen.

Depending on what statistics you glean from the Internet, only 10% to 40% of people who receive CPR after a heart attack survive. Jason was not one of the lucky ones. By the time the EMTs got there, he was turning blue. They had to shock him twice to get his heart going.

His brain did not recover from the extended lack of oxygen. Jason lingered on life support in the ICU of the Pepin Heart Institute at AdventHealth Tampa for five days, before his family chose to discontinue life support. His death affected many people, starting with his immediate family and radiating outward to touch hundreds, possibly thousands, of people worldwide. 

Here's the official obituary. Tailwinds and strong thermals, my son.

Sunday, September 22, 2024

Cloning and Upgrading a Windows 11 Boot Drive on a Dell Inspiron 16 7610

 Introduction

I bought a Dell Inspiron 16 model 7610 in January 2022. At the time, I only got a 512 GB SSD for my boot disk, because who's ever going to use 512 whole gigabytes of disk space, right? 

In September 2024, I was suddenly out of disk space. I needed a bigger boot disk. You know, the C: drive. The only disk most users have in their computer. I found lots of helpful information on the Internet, but I couldn't find a grand unified do-it-yourself "how-to" on upgrading the boot disk.

So after all of the research, and after going through it myself, I decided to document it all in one place. If this helps you, great. If you find problems with it, please add a Comment describing the problem (and your solution, if you find one). If you have questions for me, I'm sorry, but I probably won't be able to answer them. This worked for me. Your mileage may vary.

Before you start: Things to worry about

Bitlocker

This may come up at the end of the process, so I want to tell you now. That way, you won't need to panic when it comes up on your PC.

Windows 11 allows you to lock your disk, so that nobody else can get into it. This happens more or less automatically. This locking mechanism is called Bitlocker. You're supposed to copy the Bitlocker key to a secure location when you first start up your PC or install a new disk. The problem is that you do it once and forget all about it, because you'll probably never have to do it again.

Probably.

Microsoft warns you that they can't recover your Bitlocker keys if you use them.

Fortunately, when you first set up your computer or your disk, MS offered to recod your Bitlocker keys in your Microsoft account. I know, I know, Microsoft warns you that they can't recover your Bitlocker keys. But you can look them up at this web  address:  https://account.microsoft.com/devices/recoverykey . Just smile and enjoy the contradiction.

Tools and things

You will need some really small Philips screwdrivers, and a guitar pick or other prying tool. I recommend the tools in the IFixit Pro Tech or Essential Electronics toolkit.

I recommend also getting a grounding strap or antistatic wristband. You can get one from Amazon, Sparkfun, Adafruit, or your local electronics store. The IFixit Pro Tech toolkit includes a grounding strap.

Planning it out

The research

I did several web searches, using terms like "Dell Inspiron 16 7610 upgrade ssd" or "... upgrade boot disk". I learned that "upgrade" wasn't doing it, so I tried "clone" instead. I found some helpful articles on:

  • Tom's Hardware (one of my favorite tech do-it-yourself sites)
  • Reddit's r/Dell subreddit
  • Dell's own support pages. 

But none of them had a complete step-by-step how-to. I'm sure I wasn't the first person to go down this road, but nobody had actually documented it from beginning to end. 

You can find the service manual for your PC online. I found and downloaded the Official Service Manual for this computer. Here's the Dell Inspiron 16 model 7610 Documentation page. Here's the link, on that page, to the Dell Inspiron 16 model 7610 Service Manual in PDF form. 

The Dell Inspiron 16 model 7610 has two  PCIe/NVMe slots (don't shoot me if I get the terminology wrong). Slot 1 is a 2230/2250/2280 slot, and Slot 2 is a 2230-only slot. The number 2230, etc., refers to the physical size of the SSD module: 22 mm wide, and 30, 50, or 80 mm long. Normally, the PC ships with the SSD installed in Slot 1, and Slot 2 is empty.

The Inspiron 16 can manage up to 2 terabytes (TB) of disk space between the two slots. This will be important. You can't put the half-ton 2230 SSD in Slot 2 and a two-ton 2280 SSD in Slot 1, because that's 2.5 TB, which is more than the PC can handle. 

Getting the Pieces

The SSD

First, check Windows 11 Device Manager to see what kind of SSD you currently have. Right-click on Start > Device Management, or type "devmgmt.msc" in the Search window and press Enter, to open the Device Manager. Expand the Disk Drives section, and you will see that your half-ton SSD is an "NVMe BC711 NVMe SK hynix 512GB". 

SK Hynix is a perfectly acceptable South Korean semiconductor memory manufacturer. You can use an SSD module from SK Hynix, Crucial, Western Digital, Micron Technology, or several other semiconductor companies. I'm conservative enough to stick with SK Hynix, if I can.

A search for "bc711 nvme sk hynix" on Amazon.com reveals that the current SSD still sells for $85.88 (mind you, this is September 22, 2024, and Amazon's inventory may have changed by the time you read this).

Suggested 1 TB SK Hynix upgrades are the Gold P31 Gen3 for $85.99, and the Platinum P41 Gen4, for $94.99. The difference between the two is that the Gold P31 Gen3 can read/write up to 3500 MB/second, and the Platinum P41 Gen4 can read/write up to 7000 MB/second. 

Sooooo ... Gen3, or Gen4? Well, the original BC711 reads/writes up to 1,344 MB/second. If that has served you just fine, then just get the Gen3. On the other hand, if you noticed that disk read/writes were slowing you down, then spend the extra ten bux and go for the Gen4. 

The Dell service manual says that the PC can handle Gen4 SSDs, like the P41, and it recommends that "you may order a copper thermal shield from Dell support for better thermal performance." With that recommendation, it doesn't give you a part number, a webpage, or anything. See below.

The External SSD Case

I was stuck in the old way of thinking: If you're going to clone a hard disk, you start with the new hard disk in an external case, connected to your PC via USB 3.x. So I looked on Amazon for an external SSD case. I ended up buying this one from SSK because it was cheap, less than $20.00. DON'T BUY IT.

First of all, you won't need it. With the half-ton BC711 and the one-ton upgrade that you're buying, that's less than 2 TB of SSD, and you can use the PC's own internal SSD slots to do the cloning – no need for an external case.

Second, it doesn't work. I tried it. See below.

The Copper Heat Shield

DO GET IT. Even if you're using the P31 like me, not the P41, it will be worth the money (less than twenty bucks). The cooler semiconductors are, the faster they run, and the longer they last.

I got one from Amazon.com. Searching Amazon for "dell inspiron 16 7610 copper heat shield" gave way too many hits, so I'm going to save you the trouble. Just buy this one here. I don't know if it was a genuine Dell part, but it had a Dell part number and Dell barcode on the inside packaging. Don't worry about the picture on the Amazon page. The one they ship you is copper-colored.

Cloning software

What I wanted to do is called cloning: a bit-by-bit copy of one SSD onto another. This copies the boot stuff, the operating system files, the recovery partition, and all of my data files and installed programs, in such a way that I could boot from the new SSD and it would look just like the old one.

I found some good articles about cloning boot disks, and they recommended a very small number of good cloning software packages. These packages all use the latest software payment model: they have a free trial that comes with some limitations, and they offer a Pro version that you have to pay for, and instead of a one-time payment, it's so much per year. 

Sigh. I'm only going to need this software this once, if it works, and then I won't need it again until I have another PC. That's four or five years down the road. I don't want to pay for five years of nothing.

Here are the highest rated cloning solutions.

  • Macrium Reflect (or this link)
    • $50/yr
    • Free trial
    • Everybody recommends this one. I'd say it's the most popular. It would have worked great, but I didn't like the yearly payment model.
  • Clonezilla
    • Free and open source
    • Linux-based: you create a USB boot device, containing a Linux OS and Clonezilla, then you boot from the USB stick and do it that way.
    • I love Linux and I don't love Windows, but this was more complicated than I wanted to deal with.
  • Acronis True Image
    • $40/yr
    • It may also have a free trial
    • Again, I didn't like the yearly payment model. 
    • There was some other reason to prefer Macrium over Acronis, but I can't remember what it was.
    • But Acronis is still highly rated, and it's good software.
  • AOMEI Backupper
    • $40 for the Pro edition. At first I was excited because this looked like a one-time payment.
    • Free trial version also, but again I was leery of limitations.
    • It turned out that that $40 is $40/yr, just like all the others, and it autorenews yearly, but you can cancel your subscription at any time. So as long as I cancel before Sep 23, 2025, I should be okay.
    • UPDATE, August 18, 2025: I just canceled my subscription. I immediately got an email from AOMEI Backupper, offering me a "Lifetime Upgrades" version of AOMEI Backupper Pro (for the lifetime of the computer, not the human) for $25.00. "One-time fee without recurring payment." Okay, sold.
So I bought AOMEI Backupper. I'm sure I would have been just as happy with Macrium or Acronis.

Doing It

First Try: Using the External SSD Case

I did this upgrade work while I was on the road. I had gotten the parts from Amazon the day before I left. 

The external SSD case requires a screw to hold the SSD in place. I couldn't find the little plastic pouch  with the screw. It's possible that I accidentally left them at home. (EDIT: Found it the next morning while I was cleaning up. Bummer.)

So I tried running the external SSD case without them, just depending on the tight fit to hold the 2280 SSD in place. When I plugged the external SSD case into the PC, the PC beeped and booped like it was continuously connecting and disconnecting with the SSD. I finally gave up and unplugged it.

UPDATE,  A FEW MONTHS LATER: It was probably because the SSD wanted more power than my USB port could supply. The Dell Inspiron 16 7610 has a Thunderbolt port, which I rarely use. It's made to power things like this. The SSD came with a Thunderbolt cable, and I'll bet that the Thunderbolt port could have powered it.

Second Try: Using the Dell itself

Short Intro: Here's What I'm Going to Do

I had seen this suggested on the r/Dell subreddit. As mentioned above, the Dell Inspiron 16 model 7610 comes with two SSD slots. The boot disk is in Slot 1, and Slot 2 is empty. As long as the boot disk is a 2230 SSD (the short one), I should be able to move it to Slot 2, install the new 2280 SSD in Slot 1, boot from the original, and do the cloning with both SSDs in place.

This turns out to be slick, speedy, and successful. 

Put the Dell into Service Mode

If you look at the YouTube videos and some of the DIY sites, you will be instructed to unplug the battery once you get the case open. At first, this looks critically important for the Dell Inspiron 16, because it's never really OFF.

But Dell has a trick up their sleeve. I'm going to remember this, because it may be really useful. It's called Service Mode. In Service Mode, the PC disconnects the battery internally, so that you can crawl all over the insides without having to physically unplug the battery.

According to the service manual, here's what you do:
  1. Disconnect the AC adapter from PC, and disconnect anything plugged into it: USB, display, anything else. Make sure that all ports are empty. 
  2. Shut down the PC like normal.
  3. Hold down the <B> button, then press the power button for 3 seconds or until the Dell logo appears on the screen
  4. Press any key to continue.
  5. Follow the on-screen instructions. 
  6. At some point, the computer will give three short beeps and shut down again. It's now in Service Mode.
Getting out of Service Mode is a cinch. (Don't do it yet. Wait until you've installed the new SSD.) 
  1. Plug in the AC Adapter.
  2. Turn on the PC.

Open the PC

Close the display, and lay the PC, display side down, on a small towel. The towel is so you don't scratch the PC or your work surface. The towel also catches tiny screws if they try to run away during the procedure.

The Inspiron 16 has two captive screws located in the top corners, near the hinges, and seven other screws. Remove the seven screws using a super-tiny (like 00 or 0) Philips screwdriver. Then loosen the two captive screws. You may hear a "pop" as you loosen the captive screws. Put the seven loose screws in a safe place. I recommend laying a refrigerator magnet on the table and putting them on the magnet.

Now take a guitar pick or a prying tool and, starting in the top left at the hinge, insert the guitar pick in the crack between the base cover (that's what they call the bottom piece) and the rest of the PC. Work the guitar pick all the way around, while gently pulling up on the base cover. The purpose of the guitar pick or prying tool is to disengage the plastic tabs holding the cover in position, and there's a metric buttload of those plastic tabs. Use care not to break them off.

Wear Your Antistatic Wristband!

From this point on, you should have your antistatic wristband on and have it clipped to an exposed bare-metal piece of the computer. I found a bracket on the left side, near the Wifi module, that worked very well.

Move the 2230 SSD from Slot 1 to Slot 2

  1. Remove the metal shield covering Slot 1. Save the screw; you'll need it again.
  2. Lift and wiggle the M.2 2230 adapter bracket to remove it from the system board. It will require some careful wiggling.
  3. Remove the metal shield covering Slot 2. Again, save the screw.
  4. The 2230 SSD will pop up at an angle. Holding the SSD by the edges only,  remove it from Slot 1.
  5. Push the 2230 SSD into Slot 2 at an angle. Push it down into place, replace the metal shield on top of it, and attach the screw to fasten both the SSD and the shield into place.
    1. Note that the metal shield has two clips that snap onto the M.2 connector.

Install the New 1TB 2280 in Slot 1, with the New Copper Heat Shield

  1. Make sure your grounding wristband is still on your wrist, and still clipped to bare metal on the computer.
  2. Carefully remove the 2280 SSD from its storage bag, handling it by the edges only.
  3. Push the SSD into Slot 1 at an angle. Push it down into place, then place the new copper thermal shield on top of it, and attach the saved screw to fasten both the SSD and the shield into place.
    1. Like the Slot 2 thermal shield, this shield has two clips that snap onto the M.2 connector.

Note to self: Use an air jet to blow the lint off the dual fans before replacing the base cover.

Close the PC: Replace the Base Cover

Lay the base cover back in place. Starting on one of the bottom corners, gently but firmly press on the edges to re-engage those plastic tabs and snap the cover into place. Replace the seven loose screws first, then tighten the two captive screws.

Now you can take off the antistatic wristband.

Turn on the PC 

At this point, you've successfully installed the new SSD. Maybe.

Plug in the AC adapter. Press the F12 key repeatedly while pressing the button to turn on the PC. This will allow you to select the boot device. Make sure you select the old BC711. (Note to others, but not to self: Since the bootloader looks for UEFI boot devices, and the new SSD in Slot 1 is not a UEFI boot device yet, you may be able to skip the F12 pounding, just turn it on, and see if it boots like normal. If you're the first one to try this, please leave a comment letting me know if it works.)

After it boots, if you look at Windows Disk Management (Right-Click Start > Disk Management), it may not find the new SSD.

If you look in File Explorer, it will show you the old boot disk, still C:\, but it may - probably won't - show you the new SSD as D:\ or anything else.

But Windows Device Manager (Right-click Start > Device Manager > Disk drives) knows about it. You will see listed there the original BC711 device and your new one-ton SSD. On my PC, the SK Hynix Gold P31 Gen3 1TB shows up as "NVMe SGHP31-1000GM". 

And the Bootloader knows it's there. You don't need to do this, but if you want, you can Restart the PC, pressing F2 (not F12) repeatedly while it boots. When the Bootloader comes up, select Storage. You will see the new SSD listed as Drive 0 (because that's Slot 1), and the original BC711 listed as Drive 1 (because that's Slot 2).

Run Your Cloning Software

These instructions are for AOMEI Backupper Professional Version 7.4.0. Your mileage will definitely vary. Your version, or other software, may do things differently. Also, beware that free trial versions have limitations, so they may not work for you.

At first glance, you'll be tempted to click on New Backup in the center of the window, or on Backup in the left menu. DON'T.

Instead, look down the left menu until you see Clone. Select that.

It doesn't ask you for the source drive. It assumes that you want to clone the boot drive, because of course you do. Why else would you have bought a cloning app? But it does ask you to choose a destination drive.

You will notice that the boot (or source) disk is a GPT drive. The new SSD is listed as an MBR drive. How are you going to convert it to GPT? I dunno. Just click on it and see what happens. So you click on it, and AOMEI asks if you want to convert it to the same format as the boot drive. Yes, definitely. That was easy!

Make sure to enable the option along the bottom of the window to expand the clone, so that it uses all available disk space. If you don't select this, AOMEI will create a clone only as big as your old SSD, wasting all of that new space. Kinda defeats the purpose, doesn't it?

AOMEI Backupper displays a nice progress graphic while it works. Grab a cold drink, but don't go too far. Working on the internal busses like this makes the cloning process go really fast.

Rebooting

Shut down the PC, then press F2 repeatedly while restarting, to enter the bootloader again. Go to the Boot Sequence section. Select the up-arrow and down-arrow icons to reorder the boot sequence so that it will attempt to boot from the new SSD first before the BC711. If you're feeling brave, you can remove the BC711 from the list. I recommend leaving it there for now, just in case the cloning didn't work. Make sure to Apply Changes, then Exit. It will try to boot, and it will probably fail with an ominous blue screen. Keep reading

Bitlocker

If you have Bitlocker enabled, you will find yourself at an ominous blue screen telling you that you need to enter the Bitlocker number for your SSD. 

It gives you two options:

  •  to press Enter to go back to the boot sequence. Warning: You can try it, but you will probably end up at this screen again.
  • to press ESC to enter the Bitlocker recovery key. Warning: The Bitlocker key entry screen has a timeout, so after 10 seconds of inactivity it goes back to the first blue screen.

You may now panic. All is not lost, but it's perfectly acceptable to panic.

The blue screen suggests that you look at these two webpages: xxx and yyy. Sorry. I didn't capture those links fast enough. But I believe that xxx points to this one: Find your BitLocker Recovery Key. Scroll down to the section entitled "Where can I find a Bitlocker recovery key?"

If you expand that first section, called "Attached to your Microsoft account," it contains a link to log into your Microsoft account. If you are doing this upgrade work on your own Windows PC, which you bought and set up yourself, then you definitely have a Microsoft account. If not, well, you may still have a Microsoft account. Click on the link, and try to login.

If you're as lucky as I was, it will come up with a table listing all of your Bitlocker devices. There's a good sample illustration on that Find your BitLocker Recovery Key webpage.

You will see your original boot disk on the list, with a 10-character ID number and a registration date that corresponds to the date you first booted your computer. You will also see your new SSD, with a 10-character ID number and a registration date that corresponds to the date you installed the SSD and it was recognized by the bootloader and the Device Management tool. (Probably today's date, the day you're reading this.)

The Bitlocker recovery key is the long string of hyphenated numbers on the right. Go back to the blue screen, and press ESC to go to the Bitlocker key entry screen. The screen will give you the ID number of the disk it wants you to unlock. Use the keys on the numeric keypad, or keys F1-F9 (and F10 for zero) to enter the Bitlocker key. I believe you have to press Enter at the end. 

Then you should be as good as gold. That will unlock the SSD and your PC will boot into Windows 11 like before, only this time it's booting from the new SSD

Checking That It Worked

Use File Explorer  > C:  > Properties to confirm that you're booting from the new SSD. It should show a full 1 TB of space, with less than half of it used.

If your original BC711 disk is installed in Slot 2, you can use File Explorer to look at its properties or to list its contents. It may ask you for the Bitlocker key for this device. Follow the instructions above to find and enter the key, only this time you can use the regular keys 1-9 and 0 instead of F1-F9 and F10.

What to Do With the Old SSD

I intend to wait a few days and make sure the new SSD is working. Then I will back up critical stuff from the old SSD onto the cloud and onto my external backup HDD, reformat the old SSD, and use it as a half-ton D: drive.

Friday, September 6, 2024

Cancer Strikes Again - not Me, but my Family

 I hate cancer.

Cancer is a vicious, ugly beast. It is mean. It is cruel. It is heartless.

I posted previously about my own experiences with cancer, and how I got to beat it twice, without going through the hard stuff.

Cancer didn't like that. So it attacked my loved ones instead.

Around December of last year, my daughter-in-law was diagnosed with a particularly aggressive breast cancer. We were worried that we would lose her. She underwent a double mastectomy, and then reconstructive surgery, and will take an estrogen blocker for the rest of her life (the doctor called it "instant menopause") to starve and kill any future tumors. She appears to be recovering and in good health. I cannot put into words how grateful we are for that.

I'm not the kind of father-in-law to call her up and say, "Hi, Jen! How are your boobs doing?" So I've been getting updates from my wife, my son, and what little bits my daughter-in-law passes along in casual conversation. However, I did find a great T-shirt online. I passed the idea to my sweet wife, who laughed about it with my daughter-in-law. It says "Of course they're fake! My real ones tried to kill me."

In August of this year, my youngest daughter was diagnosed with cancer in one lung. After a PET scan, doctors told her it had spread to her spine. That makes it Stage IV. The doctors are talking about starting with immunotherapy and radiation therapy. They don't expect to make it go away, only to stop it for now. That means it will eventually come back and kill her.

The tumors in her chest cause an accumulation of excess fluids in the cavity around her left lung. This causes her shortness of breath, increased heart rate, and severe discomfort -- maybe even pain. The tumors in her spine cause back pain, pain in other places because spine and nerves, you know, and numbness in one arm. It hurts that we will one day lose her, but it hurts even more to see such a gentle soul in such pain.

Neither of these women had any risk factors. My daughter-in-law is only (guessing; I'll correct it later) 44 years old. My daughter is only 37. 

In The Lord of the Rings, Theoden, king of Rohan, loses his son in battle. Theoden says, "No parent should have to bury their child." One day, that will be me.

I have many more thoughts about this, which I want to put down in this blog. However, it will take me a while to put them into words. Check back here for edits and updates.


Saturday, July 13, 2024

Before the 1990s, what did you do all day?

 On the Reddit sub AskOldPeopleAdvice, someone asked "What did people do all day before the 90s? Was it more boring than today because of the lack of entertainment and the internet?"

I've seen many responses to questions like this, in memes across the Internet. This time I sat and thought for a bit, and then wrote my own response. Here's what we did before the 1990s:

Tuesday, April 2, 2024

Not a Word Peeve: Whither and Whence

 After having discussed who and whom, I have some locational (toponymic?) words to discuss briefly.

When's the right time to use here, hither, and hence? In the 21st Century, nobody even says hither and hence anymore. They are practically ancient history. 

Likewise with where, whither, and whence; and there, thither, and thence.

Here's the rule of thumb:

  • The -ither ending conveys a sense of to.
  • The -ence ending conveys a sense of from.

To beat this dead horse into a bloody pulp:

hither = to here

hence = from here

whither = to where

whence = from where

thither = to there

thence = from there

So when a woman bats her eyes and gives you "a come-hither look" she wants you over there next to her.

And when someone says "We're taking the train to Dorset, and thence to Southampton," they're saying that the second leg of the journey leaves from Dorset.

And this dialogue could have been lifted straight from The Lord of the Rings:

"Whence have you come hither, and whither are you going?"

"We spent the night in Rohan, and we departed thence at dawn's first light. We are in search of the road to Gondor. for we are journeying thither."

One interesting variation is the use of "hence" meaning "therefore". It signals that the you're using the last assertion or statement as the jumping-off point for the next one.

Another interesting variation is "henceforth" meaning "from now on, moving forward."

Not a Word Peeve, Just Fun: "Who" versus "Whom"

This one is just for fun. I am aware that this information is as useful as cursive writing in this century. Still, it's fun to know, and it may be marginally useful.

In modern English, the distinction between "who" and "whom" is disappearing, with "who" replacing "whom" in almost all usages. Want to learn how to use who/whom correctly? Read on.

James Thurber's rule of thumb

It was author and humorist James Thurber who said, in 1929, that the difference between "who" and "whom" is how high-class you want to sound. For example, if you're at a picnic with beer and hotdogs and shorts and Hawaiian shirts, and you meet someone new, you ask them, "Who are you, anyways?" However, if you're at a fancy black-tie reception with cocktails and caviar, and you meet someone new, you ask them "Whom are you, anyways?" 

And yes, he put the "s" on "anyways". Because he was James Thurber, and the year was 1929.

My rule of thumb

Anyway(s), the real distinction between "who" and "whom" is easy to manage. Since "who" and "whom" are usually (but not always) used in questions, the easiest thing to do is rearrange the question into an answer, and try plugging in "he" or "him" in place of "who/whom". If "he" fits, then use "who". If "him" fits, then use "whom."

To repeat: 

  • "He" to "who".
  • "Him" to "whom".

Two examples

"Who/whom are you going with?" Rearrange it to form the answer "You are going with ..." Obviously, the correct ending for this answer is "him". So use "Whom" in the question.

"Who/whom is going with you?" This one doesn't even need to be rearranged. The answer is obviously "He is going with you." So use "Who" in the question.

Another example, not a question

Since this example uses the plural "those", we will use "they" and "them" instead of "he" and "him". The rule of thumb works the same way.

"Plan on spending the holiday with those whom you love, and who love you." This is the correct usage.

"Whom you love" can be rearranged to "You love them".

"Who love you" can be rearranged to "They love you".

In conclusion, your Honor ...

As I said at the beginning, which one you use really doesn't matter, not in the 21st Century. It's just fun to know.

Welllllll, maybe.

It doesn't matter one whit in spoken English. But I think that in written English, it may move you one step closer to more precise speech.